8605 SKET tubular strander SR 6x800 , 55 kW, spool flange Ø max. 31.4961 ", wire Ø max. 5,5 mm, strand / conductor Ø max. 0.5984 ", max. 32.7 m/min, with take-up

8604 WERNER & PFLEIDERER line for the production of PVC granulate , consists of 2 PVC granulate production units, output capacity ca. 800 kg/h

8598 FENN inverted block RD 1500 , 184 kW, inlet wire Ø max. 1.9685 ", horizontal, capstan Ø 900 mm, max. 393.7 ft/min

8594 WAFIOS chain link fencing machines DF 32 , 4 kW, wire Ø max. 0.122 ", pitch max. 3.1496 ", weaving width max. 78.7402 ", production capacity 180 m²/h

8584 fine wire production for high carbon steel wires , up to now used for high carbon wire with 0,8% C, production capacity per hour 775 kg/h (depending on wire diameter)

8583 LEWIS wire straightening and cutting machine 11 F, material Ø min. 0.4921 ", material Ø max. 0.8268 ", outlet table 6000 mm

8581 MALI taping machine , DC motor, 13 kW, capstan Ø 450 mm, strip width max. 2.3622 "

8576 KOCH straight-line drawing machine KGT 400-13 , up to now used for steel wire 0,8 % C, AC motors, 13 x 10,0 kW, total no. of dies 13, inlet wire Ø max. 0.0945 ", finished wire Ø min. 0.0177 ", vertical, max. 3937.01 ft/min, single spooler KHS 800

8567 FIB galvanizing line , up to now used for mild steel and steel wire, no. of wires 18, material Ø max. 7,00 mm, production capacity low carbon wire max. 32 to. / 24 h, heating oven natural gas heated, galvanizing oven natural gas heated, coiling station 18 stations

8565 SCHLOEMANN extrusion press for tubes ND 320, up to now used for copper pipes, motor power 3x200 kW, pressing force 1250 to, tube Ø max. 100 mm

8557 KUKAMA double spooler DWPA 630 , DC motor, 8 kW, suitable for up to now in use for cable from 0,35 to 3,00 mm², spool flange Ø max. 24.8031 ", max. 3937.01 ft/min

8250 NIEHOFF wet-type multiwire drawing machine MMH 101 , up to now used for Cu, bare and tinned, DC motor, no. of wires 24, inlet wire Ø max. 0.0709 ", finished wire Ø min. 0.0071 ", max. 5905.51 ft/min, annealer type VG 30, 2 static spooler NIEHOFF WSV 800, 1 horizontal spooler SL 800

8307 TONOLLI rod breakdown drawing line , up to now used for Cu rod, 12 x 31 kW, total no. of dies 12, inlet wire Ø max. 0.315 ", finished wire Ø min. 0.0472 ", speed max. 4330.71 ft/min, static coiler Herborn WF 800, single spooler Tonolli 1200 mm for collapsible spools

8561 EVG mesh welding line G 45/102 , 18,5 kW, line wire Ø from spool max 0.315 ", line wire Ø pre-cut max 0.3937 ", no. of line wires max 53, line wire distance max 11.811 ", cross wire distance max 15.748 ", strokes 90 min, mesh width max 108.2677 ", welding width max 102.3622 "

7617 KRAFT armouring line 60 x 400 + 6 + 12 x 250, up to now used for steel wire, spool flange Ø max. 15.748 ", wire Ø max. 0.1378 ", lay length min. 1.3583 ", lay length max. 25.9921 "